Brookstone CandyMan Instructions Manual page 16

Motion-activated candy dispenser
Table of Contents

Advertisement

Problem:
Handfuls are inconsistent .
Solution:
• Irregular-shaped candy and nuts may cause inconsistent handfuls .
• Make sure there is no debris on the sensor . Turn off the unit and gently wipe
the sensor with a damp cloth .
Problem:
There is a loud clicking noise when the sensor is activated .
Solution:
The clicking noise is a safety feature that indicates candy/nuts may be stuck in
the chute . Turn the unit off . gently tilt or tap the unit to clear any candy or nuts stuck
in the chute . If this issue is not resolved, remove any candy/nuts from the reservoir
and disassemble the unit per the instructions on page 8 to clear any candy/nuts
from the chute .
M&M'S® and M&M'S® Minis® are registered trademarks of Mars, Incorporated .
Skittles® is a registered trademark of Wm . Wrigley Jr . Company and its affiliates .
Reese's® Pieces® is a registered trademark of The Hershey Company .
Jelly Belly® is a registered trademark of Jelly Belly Candy Company .
gobstopper® is a registered trademark of Société des Produits Nestlé S . A . , Vevey, Switzerland .
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents