Table of Contents
Advertisement
L-508 Cine BASIC OPERATION (Additional operation to L-508)
6. Measurement Lock and Measurement Lock Off (Cine/Still mode)
1. Hold down the MODE button and ISO button
and "Loc" will appear to indicate that the
Measurement is locked.
The last measurement is held until the lock is released,
even if the Set/change dial is accidentally moved.
2. To release the Measurement lock, perform the
same operation for the Measurement lock. Hold
down the MODE button and ISO button and "Off"
will appear to indicate that the Measurement lock
is released.
7. F/stop analog/digital range
The ranges of the f/stops displayed:
F/stop on the analog scale: f/0.5 to f/45 in 1/2 step
F/stop digital:
8. Exposure Compensation (Cine/Still mode)
L-508Cine is calibrated accurately to Sekonic standard and no further correction
of the meter is required. However, if you want to change the exposure index for
your specific requirements, the L-508Cine can be adjusted in precise 1/10 step in
a +/- 9.9 EV independently in Incident or Reflected mode. It is recommended that
the correction should be made after your taking sufficient number of test in actual
photographic conditions and evaluating the results.
1. Select either Incident mode or Reflected mode with the
Incident/Reflected Selector according to the mode you want to make
correction.
2. Hold down the ISO button and IS02 button simultaneously, and turn the
Set/change dial.
• Turning the dial counterclockwise produces a higher reading resulting
underexposing when taking a photograph.
-5-
f/0.5 to f/90 in 1/10 step
Hide quick links:
Advertisement
Table of Contents
