Use Of Your Appliance; The Control Panel; Temperature Selector; Rinse Hold Button - Zanussi TA1033V Instruction Book

Washing machine ta1033v
Table of Contents

Advertisement

USE OF YOUR APPLIANCE

The control panel

1
2
1. ON/OFF pushbutton " "
Press the ON/OFF pushbutton, the programme starts.
2. Half load pushbutton "
This pushbutton allows to wash small quantity of linen
not much soiled (2,5 kg) only on the cotton programmes
by cancelling one rinse.

3. Rinse hold button "

Press this button to leave the water in the drum after the
wash cycle is completed. This option is suitable for all
the washing programmes. The clothes are left suspended
in water after the final rinse to prevent the formation of
creases.
4. Spinning speed variator
It enables to select the spinning speed of your washing
machine from " " (draining) to 1000 rpm for cotton
programmes and from " " to 800 rpm for synthetic,
delicates and wool programmes.

5. Programme selector

It enables to select the most adapted programme to the
nature and degrees of soil of your laundry.
Turn the programme selector clockwise to select the
chosen programme.
The programme selector indicates each programme
phase as it takes place.
At the end of the programme, the appliance stops
automatically on a stop position
position (if the rinse hold button " " has been selected).
Never turn the programme selector when the appliance is working.
3
4
"
"
"I"
or on a rinse hold
5
Never turn the programme selector anticlockwise.

6. Temperature selector

It enables to choose the most adapted temperature
between cold ( ) and 90°C. Choose the temperature
which corresponds to the chosen programme, with the
help of the indications or the programme table, according
to the fibers and the fastness of the colours.

Detergent dispenser

2
4
1
3
5
Before using your washing machine for the first time, we
recommend you to run a 90° C cotton cycle without any
laundry to remove any manufacture residue from the
drum and tub :
• Pour a 1/2 measure of detergent into the "detergent
dispenser".
• Select the programme "2".
• Press the ON/OFF button : the wash cycle starts.
- 3 -
6
1. Washing powder or liquid
detergent for programmes with pre-
wash (
)
2. Washing powder or liquid
detergent for the main wash ( )
3. Bleach compartment ( )
4. Liquid additives (fabric softener
and conditioner...)( )
5. Softener overflow

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ta833v

Table of Contents