Zanussi T 733 V Instruction Manual

Zanussi T 733 V Instruction Manual

Washing machine

Advertisement

146 3866 00
ZANUSSI
ZANUSSI
WASHING MACHINE
T 833 V
T 733 V
INSTRUCTIONS MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi T 733 V

  • Page 1 ZANUSSI ZANUSSI WASHING MACHINE T 833 V T 733 V INSTRUCTIONS MANUAL 146 3866 00...
  • Page 2: Table Of Contents

    CONTENTS For the user For the installer Safety instructions 23/24 Technical information Description of the appliance Installation Use of your appliance Unpacking Operating instructions 27/28 Installation Programme chart 29/30 Levelling Hints & Tips 31-33 Moving of the appliance Cleaning and maintenance Water connection If something doesn't work 35/36...
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS You must read the whole of this instruction book Small and delicate objects (e.g. baby socks, before using the appliance. Follow the advice stockings) can be easily washed inside a small carefully. Keep the book for future reference. If pillowcase with a zip fastener or in larger you sell or give away the appliance, make sure socks.
  • Page 4 Safeties Environmental information Lid : your washing machine is equipped with a safety avoiding the switching of the appliance All materials marked by the symbol when the flapdoors of the drum are opened ; biodegradable. They can be disposed of without the closure of the lid is so impossible.
  • Page 5: Description Of The Appliance

    DESCRIPTION OF THE APPLIANCE Programme selector Spinning speed variator Temperature selector Pushbuttons Control panel Control lamp Handle for opening lid Lever for castors Trap door for lint filter Detergent dispenser Symbols Washing powder for programmes with pre-wash. Washing powder or liquid detergent for the main wash.
  • Page 6: Use Of Your Appliance

    USE OF YOUR APPLIANCE The control panel Never turn the programme selector when the appliance is working. 1. ON/OFF pushbutton " " and the following options: Press the on/off pushbutton, the programme the draining position " " in order to not spin starts : the control lamp illuminates.
  • Page 7: Operating Instructions

    OPERATING INSTRUCTIONS Before using your washing machine for the first time, we recommend that you do a preliminary wash with the machine empty, as a precaution to clean the drum, tank and the product box. 1. Pour a dose of detergent in the “washing” detergent dispenser. 2.
  • Page 8: Select The Temperature

    6. Select the temperature Choose the temperature which corresponds to the chosen programme, with the help of the indica- tions or the programme table, according to the fibers and the fastness of the colours. 7. Select the spinning speed Turn this knob to choose : - a rinse hold "...
  • Page 9: Programme Chart

    PROGRAMMES CHART Programmes for cotton/linen Maximum load : 5,0 kg (cotton) ° ) l ( ° 0 - ° ° 0 e t i - ° ° 0 - ° ° 0 e t i - ° ° 0 ° 0 °...
  • Page 10 Programmes for synthetics/delicates/wool Maximum loads : 2,5 kg (synthetics), 1 kg (wool). ° ) l ( ° 0 - ° ° 0 i t e - ° ° 0 - ° ° 0 i t e - ° ° 0 °...
  • Page 11: Hints And Tips

    HINTS AND TIPS Resistant white and coloured synthetics can Washing hints normally be washed at 60°C but also in this case You are advised not to leave your laundry too long, 40°C is sufficient if the laundry is not excessively especially when damp.
  • Page 12: Liquid Detergents

    To remove paint stains, for example, use a volatile Liquid detergents substance such as turpentine: in this case, you Using the new automatic dispenser for liquid should wait for it to dry completely before washing. detergents, it is possible to use a liquid detergent The manufacturer of your washing machine is not for main wash phases if you start the washing responsible for any damage deriving from the use...
  • Page 13 Wasch code symbols These symbols appear on fabric label, in order to help you to choose the best way to treat your laundry. STRONG WASH Max. wash Temperature Temperature Temperature Temperature 30°C 60°C 40°C Hand Do not 95°C wash wash at all DELICATE WASH Do not bleach...
  • Page 14: Cleaning And Maintenance

    CLEANING AND MAINTENANCE Make sure that the machine is unplugged and the water tap turned off before undertaking any kind of maintenance. Bodywork The outside or the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning.
  • Page 15: If Something Doesn't Work

    IF SOMETHING DOESN'T WORK ? Problems Problems Problems Problems Problems Solutions Solutions Solutions Solutions Solutions The wash results are not as usual. The wash results are not as usual. The wash results are not as usual. The wash results are not as usual. The wash results are not as usual.
  • Page 16 IF SOMETHING DOESN'T WORK ? Problems Problems Problems Problems Problems Solutions Solutions Solutions Solutions Solutions The machine vibrates or is too noisy. Check that : all the transit bolts and packing have been removed, all the feet resting firmly on the ground, the lock nuts have been secrured, the machine does not touch something, the load is sufficent.
  • Page 17: Service

    SERVICE If you are not able to identify or to solve the problem, consult our service department. Before calling, note the brand, model and date of purchase of your machine : the service department will require this information. Data plate You will find this information on the data plate (at the back of the appliance) and on a sticker located on the internal door filter.
  • Page 18: For The Installer

    FOR THE INSTALLER Technical information Dimensions height with panel 895 mm height without panel 850 mm width 397 mm depth 600 mm Power supply voltage / frequency 230 V / 50 Hz Total power absorbed 2300 W (10 A) Heater rating 1950 W Water pressure minimum...
  • Page 19: Installation

    Installation The floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the machine is no longer guaran- teed.
  • Page 20: Water Connection

    Water connection Connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar (fig.1). If the water connection is made onto new pipes or onto pipes which have not been used for a long time, it is advisable to run off a certain amount of water before connecting the machine.
  • Page 21 05/02...

This manual is also suitable for:

T 1033 vT 1233 vT 833 v

Table of Contents