CONTENTS For the user For the installer Safety instructions 27/28 Technical information Description of the appliance Installation Use of your appliance Unpacking Operating instructions 31-33 Installation Programmes tables 34-37 Levelling Hints & Tips 38-41 Moving of the appliance Cleaning and maintenance 42/43 Water connections Is something does not work...
SAFETY INSTRUCTIONS You must read the whole of this instruction manual Do not put articles in the washing machine if before you use the appliance. Follow the advice you have just cleaned them using a stain carefully. Keep the book for future reference. If you remover containing gasoline, alcohol, sell or give away the appliance, make sure that the trichloroethylene, etc.
Page 4
Environmental information All packing devices must be removed from the washing machine before you use it. Severe damage may occur to the washing machine or All materials marked by the symbol can be adjacent furniture if you forget to remove any of recycled.
DESCRIPTION OF THE APPLIANCE Spinning speed Timer variator Temperature Drying time selector selector Pushbuttons Programmes board Control lamp Handle for opening lid Lever for castors Trap door lint filter Detergent dispenser Symbols ( ) Washing powder for programmes with prewash (1). ( ) Washing powder for the main wash (2).
USE OF YOUR APPLIANCE The control panel Never turn the programme selector when the appliance is working. 1 On/off pushbutton " " 7 Spinning speed variator Press the "on/off" pushbutton, the programme starts: It enables to choose the spinning speed from 500 to the power control lamp lights on.
OPERATING INSTRUCTIONS Before using your washer dryer for the first time, we recommend that you do a preliminary wash with the machine empty, as a precaution to clean the drum, the tub and the detergent dispenser. 1. Pour a dose of detergent in the “washing” compartment. 2.
6. Select the temperature Choose the temperature which corresponds to the chosen programme, with the help of the indica- tions or the programme table, according to the fibers and the fastness of the colours. 7. Select the spinning speed Choose the spinning speed suiting best to the nature of your laundry and to the degree of humidity wished at the end of the wash.
Page 9
Unplug the machine from the wall socket and turn off the water tap. If your washing was not spun at the end of the cycle, check that the load is properly distrib- uted in the drum before restarting a spin cycle (see “unbalanced weight protection system”...
PROGRAMMES TABLES Washing programmes for cotton Maximum load for washing : 5,0 kg Maximum load for drying : 2,5 kg ° ) l ( ° 0 ° 0 ° 0 e t i - ° ° 0 ° 0 ° 0 e t i - °...
Page 11
PROGRAMMES TABLES Washing programmes for synthetics, delicates and wool Max. load for washing : 2,5 kg (wool: 1 kg) Max. load for drying : 1,5 kg ° ) l ( ° 0 ° 0 ° 0 i t e - ° °...
PROGRAMMES TABLES Drying programmes Progr. Laundry Load ready to put away ready to iron time in min. time in min. Prog. F Cotton 2,5 kg DRYING 1,5 kg 1,0 kg Prog. K Synthetics 1,5 kg DRYING 1,0 kg 0,5 kg The drying times have been defined according to the conditions fixed by the norms.
Page 13
If a drying time is not selected, the drying pro- to dry synthetics gramme does not start. - open the water inlet pipe Linked drying - turn the programme selector on the position of the programme K "Drying" - select the drying time with the drying time In case of linked drying (washing programme with selector a drying programme), the laundry load will be...
HINTS AND TIPS Resistant white and coloured synthetics can Washing hints normally be washed at 60°C but also in this case You are advised not to leave your laundry too long, 40°C is sufficient if the laundry is not excessively especially when damp.
To remove paint stains, for example, use a volatile Liquid detergents substance such as turpentine: in this case, you It is possible to use a liquid detergent for main should wait for it to dry completely before washing. wash phases if you use a ball-type packaging ball The manufacturer of your washing machine is not and if you start the washing machine immediately responsible for any damage deriving from the use...
Drying Never machine dry : Our advices - the woolens, chlorofibers, silk, veilings, tights, nylon stockings - rubberized fabrics, plastic-coated textiles and - do not overload the drum of your washer/dryer quilted articles (2,5 kg of dry cottons or 1,5 kg of dry synthetics). - the articles having been previously cleaned with For the particularly fragile laundry, it is inflammable products...
Wash code symbols These symbols appear on fabric label, in order to help you choose the best way to treat your laundry. Strong wash Max. wash Max. wash Max. wash Max. wash temperature 30°C temperature 95°C temperature 60°C temperature 40°C WASH Do not Hand...
CLEANING AND MAINTENANCE Always unplug your washing machine before cleaning. Removing scale from your washer dryer It is usually not necessary to remove scale from the washing machine if the correct amounts of detergent were added. If you need to remove scale, use a special non- corrosive product specially designed for washing machines, that you can buy in the shop.
Page 19
The drain filter Fig.1 Fig.2 The machine has got a mecanic filter located on the front part to collect lint and small objects (toothpins, coins, pins, etc.) inadvertently left in the clothes. It is essential that this filter is cleaned regularly.
Page 20
IF SOMETHING DOESN'T WORK ? Problems Problems Problems Problems Problems Solutions Solutions Solutions Solutions Solutions The wash results are not as usual Check that : was the wrong quantity or the wrong detergent added ? Insufficient detergent leads to grey washes and scale deposits in the machine.
Page 21
IF SOMETHING DOESN'T WORK (continue) Problem Problem Problem Problem Problem Solutions Solutions Solutions Solutions Solutions The machine empties as it fills Check that : the end of the drain hose is not too low. There is water on the floor Check that : there is not too much detergent or unsuitable detergent.
SERVICE If you have unable to identify or solve the problem, consult our servicing depar tment. Before telephoning, make a note of the make, model and date of purchase of your machine : the service department will require this information. Data plate You will find these informations on the data plate of the appliance.
FOR THE INSTALLER Technical information Dimensions height with panel 895 mm height without panel 850 mm width 450 mm depth 600 mm Power supply voltage / frequency 220 V / 50 Hz Total power absorbed 2200 W (10 A) Heater rating for washing 1950 W Heater rating for drying 1320 W...
Installation The floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the machine is no longer guaran- teed.
Water connections Connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar (fig.1). If the water connection is made onto new pipes or onto pipes which have not been used for a long time, it is advisable to run off a certain amount of water before connecting the machine.