Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch CRS-RM-905FI
Summary of Contents for Bosch CRS-RM-905FI
- Page 1 NurseCall N46 Wall Transmitter en User Manual...
-
Page 3: Table Of Contents
Wall installation 5.2.3 Connecting to the power supply 5.2.4 Reset 5.2.5 Transmitter Identification 5.2.6 Operation Check 5.2.7 Replacing the battery 5.2.8 Configuration and Wiring Inputs and Outputs General inputs Wired Outputs Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... - Page 4 Long term storage conditions Disposal Disassembly Local disposal locations Returning to the manufacturer Materials 9.4.1 Battery Appendix 10.1 Electrical specifications 10.2 Dimensions and weight 10.3 Operating temperature 10.4 EC-Declaration of conformity 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems...
-
Page 5: Identification
NurseCall N46 Wall Transmitter Identification | en Identification Document Name User Manual 970.030 Table 1.1 Document No. Version Description v1.1 | 2009.09 First Edition Table 1.2 Version Management Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 6: Customer Support Addresses
CH-2300 La Chaux-de-Fonds NL-5600 JB Eindhoven Switzerland Netherlands Phone: +41 32 327 25 40 Phone: +31 (0)900 8212499 Bosch Security Systems France SAS Bosch Security Systems nv/sa Atlantic 361 Torkonjestraat 21F 361, avenue du Général de Gaulle B-8510 Marke F-92147 Clamart... -
Page 7: Generalities
Two LED signal lamps allow the progress to be monitored on the device. In this document you will find all the information you need for the installation and the use of the NurseCall N46 Wall Transmitter. Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 8: Safety Instructions
The NurseCall N46 Wall Transmitter may not be used under exposure to the direct sunlight, to heat, to dust or to an excessive humidity (only use the equipment in a clean environment). 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 9: General Safety Instructions
Discharge yourself from electrostatic loads by touching a grounded conductive surface before opening the unit. Avoid touching conductive parts inside the NurseCall N46 Wall Transmitter if not abso- lutely necessary. Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 10: Observation And Information
In case of defective operation or any other technical incident for which no remedy is described in this manual, please contact immediately your local representative. Special safety instructions Appropriate safety instructions linked to specific risks are described in the corresponding section of this manual. 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 11: Description
LED indicator for alarm LED indicator for presence Green acknowledgment button, to acknowledge an alarm locally. Blue assistance call button Socket for coded key insertion (option) Installation compartment Jack plug for pear-push button Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 12: Main Functions
4.3.2 Relay contacts for external signals Optionally, relay contacts for room signal lights and connecting ports for wired room installation can be used. 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 13: Installation
List of contents Reference Description RM.905.FI NurseCall N46 Wall Transmitter RM.906.FI 2 screws 2 screw anchors 1 CR2450 3V Lithium battery 970.030 NurseCall N46 Wall Transmitter User Manual Table 5.1 Packing list Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 14: Installation
The three upper holes are used for positioning the device and cannot be reached from the installation compartment. Two of the lower holes can be reached from outside and thus used for fixing the device. 13.1 53.8 59.9 18.1 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 15: Connecting To The Power Supply
Once the transmitter has been installed and setup properly, it is recommended to check all functionalities of the device. The radio transmission can be checked by sending an acknowl- edgement call by pressing the green button. Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 16: Replacing The Battery
Open the compartment cover (1) by sliding it downwards and then towards you. Carefully remove the used battery (2). Place the new battery. The positive terminal must be facing you. Replace the compartment cover. Fig. 5.1 Replacing the battery 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 17: Configuration And Wiring
Setting up one or more inputs to "NC" position results to higher power consumption. This con- figuration should be used with external power supply or will reduce the battery life. Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 18: Inputs And Outputs
Reserve Call or The contact closing causes a Reserve Call for Assis- Call or a Call for Assistance tance The contact opening causes a Reserve Call or a Call for Assistance 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 19: General Configuration
NurseCall N46 Wall Transmitters that feature the output relays are delivered with the Staff Presence Processing activated (B6 open). Models that do not feature the output relays are delivered with the Staff Presence Processing disabled (B6 soldered). Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 20: Use
B4. A Call for Assistance is signaled by red double flashes on the signal lamp and by the alternate action/release of the relay Call for Help. 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 21: Call Acknowledgement (Staff Presence)
Up to four categories of Caregivers may be identified by using different keys. The Caregiver Arrival message is not repeated. Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 22: Caregiver Departure
Call for Assistance – Reserve Call NOTICE! The device connected to the Technical Alarm input is allowed to remain in the activated posi- tion; without transmission of the Error Message. 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 23: Operation
NOTICE! When the NurseCall N46 Wall Transmitter is powered by an external power supply, the signal lamps follow the state of the corresponding relay outputs. Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 24: Legend Of Illustrations
** If the function Assistance only in case of Staff Presence is activated and the NurseCall N46 Wall Transmitter is not in Staff presence state, the Call for Assistance causes a state Alarm without Staff Presence and a Call for Help radio message. 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... - Page 25 Relay contact Alarm with staff (none) presence Assistance with staff Call for Assistance Call for Help presence Call Stand-by Acknowledgement Acknowledgement Assistance with staff Call for Assistance Call for Assistance presence Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09...
- Page 26 Radio Message Staff presence (none) without alarm Alarm with staff Call for Help Call for Help presence Call Acknowledgement Stand-by Acknowledgement Assistance with staff Call for Assistance Call for Assistance presence 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems...
-
Page 27: Device Behavior During Coded Key Insertion And Removal
Coded key removal Stand-by *** code *** If the call has not been acknowledged, removing the key will turn the NurseCall N46 Wall Transmitter in Alarm without Staff Presence state. Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... - Page 28 Radio Message Action State Relay contact Staff presence (none) without alarm Staff presence Staff arrival with Coded key insertion without alarm code (unchanged) Staff departure with Coded key removal Stand-by code 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems...
-
Page 29: Operation With The Staff Presence Processing Deactivated
Assistance without (none) staff presence Assistance without Call for Assistance Call for Help staff presence (unchanged) Call Acknowledgement Stand-by Acknowledgement Assistance without Call for Assistance Call for Assistance staff presence Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 30: Device Behavior During Coded Key Insertion And Removal
(unchanged) Assistance without Staff departure Coded key staff presence removal with code (unchanged) There is no state change when the coded key is inserted or removed. 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 31: Storage
NurseCall N46 Wall Transmitter in its original packing material in a storage room: Backup battery removed; Protection against direct sunlight and dust. Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 32: Disposal
The battery should never be placed in municipal waste. Use a battery disposal facility if avail- able. Fig. 9.1 Crossed-out wastebasket symbol Please check local regulations for disposal of batteries or call your local representative for information. 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... -
Page 33: Appendix
[mm] Depth Width Height Casing weight Weight (including antenna and power supply adaptor) Table 10.2 Dimensions and weight 10.3 Operating temperature Operating temperature 0 - 55°C Table 10.3 Environmental conditions Bosch Security Systems User Manual 970.030 | v1.1 | 2009.09... -
Page 34: Ec-Declaration Of Conformity
| Appendix NurseCall N46 Wall Transmitter 10.4 EC-Declaration of conformity Fig. 10.1 EC-declaration of conformity, main page 970.030 | v1.1 | 2009.09 User Manual Bosch Security Systems... - Page 36 Bosch Sicherheitssysteme GmbH Bosch Security Systems France SAS TeleAlarm SA Bosch Group Haus-ServiceRuf Atlantic 361 Rue du Pont 23 Ingersheimer Straße 16 361, avenue du Général de Gaulle CH-2300 La Chaux-de-Fonds D-70499 Stuttgart F-92147 Clamart Switzerland Germany France Phone +41 32 327 25 40...