Operating Instructions - Zanussi T803V Instruction Manual

Before using your appliance for the first time, we recommend that you do a preliminary wash with
the machine empty, as a precaution to clean the drum, the tub and the detergent dispenser.
1. Pour a dose of detergent in the "washing" compartment.
2. Select the "whites 90°C" program without prewash.
3. Press the on/off button " ". The cycle starts.
1. Place the laundry in the drum
lift up the lid of the machine.
open the drum with your two hands by pressing the button
A and the two flapdoors till they disengage.
introduce the laundry into the drum ; close the drum and
the lid of the machine.
Be careful : before closing the lid of your machine, make
sure that the drum flapdoors are correctly closed :
the two flapdoors fastened,
the button A pressed out.
2. Measure out the detergent
Measure out the amount of detergent recommended by the
manufacturer in the main wash compartment ( ).
If you wish to carry out a prewash, pour the amount required
into the prewash compartment (
3. Add the fabric softener
Pour the softener, if required, into the compartment marked
( ). Do not exceed the MAX level.
Your washing machine has been conceived in order to
save water and detergent products. Please take care
the filling level of the detergent products do not exceed
the MAX marks located near the display window of your
detergent dispenser.
4. Press the "
HALF LOAD
pushbuttons if required.
5. Select the temperature
Choose the temperature which corresponds to the chosen
programme, with the help of the indications or the pro-
gramme table, according to the fibers and the fastness of
the colours.
6. Select the spinning speed
Choose the spinning speed suiting best to the nature of your
laundry and to the degree of humidity wished at the end of
the wash (from draining " " to 800 rpm).
7. Select the programme
Choose the programme according to the nature and the
degree of soil of the laundry.
Turn the programme selector clockwise to select the chosen
programme.
8. Starting of the programme
The ON/OFF pushbutton " " enables to switch on your
machine. The control lamp lights on and the programme
begins.
9. At the end of the programme
When the selected programme is over, the machine stops
automatically. The timer knob stops on the position "I" for
the cotton programmes and the control lamp lights off.
The synthetics programmes end by a rinse hold in order to
avoid the formation of creases. You can finish these pro-

OPERATING INSTRUCTIONS

).
" or/and the "
RINSE PLUS
"
grammes by a short spinning (programme N) or by a
draining (programme P). Depress the on/off pushbutton " "
before doing your choice.
After each wash, depress the on/off pushbutton " ". Press
off the pushbuttons if necessary ; unplug the machine from
the wall socket ; turn off the water tap.
- 8 -
A