Table of Contents
Advertisement
Before using your appliance for the first time, we recommend that you do a preliminary wash with
the machine empty, as a precaution to clean the drum, the tub and the detergent dispenser.
1. Pour a dose of detergent in the "washing" compartment.
2. Select the "whites 90°C" program without prewash.
3. Press the on/off button " ". The cycle starts.
1. Place the laundry in the drum
lift up the lid of the machine.
open the drum with your two hands by pressing the
button A and the two flapdoors till they disengage.
introduce the laundry into the drum ; close the drum
and the lid of the machine.
Be careful : before closing the lid of your machine,
make sure that the drum flapdoors are correctly
closed :
the two flapdoors fastened,
the button A pressed out.
2. Measure out the detergent
Measure out the amount of detergent recommended
by the manufacturer in the main wash compartment
( ).
If you wish to carry out a prewash, pour the amount
required into the prewash compartment ( ).
3. Add the fabric softener
Pour the softener, if required, into the compartment
marked ( ). Do not exceed the MAX level.
Your washing machine has been conceived in
order to save water and detergent products. Please
take care the filling level of the detergent products
do not exceed the MAX marks located near the
display window of your detergent dispenser.
4. Press the "
HALF LOAD
spinning speed reduction pushbutton "800/400" if
required.
5. Select the temperature
Choose the temperature which corresponds to the
chosen programme, with the help of the indications or
the programme table, according to the fibers and the
fastness of the colours.
6. Select the programme
Choose the programme according to the nature and
the degree of soil of the laundry.
Turn the programme selector clockwise to select the
chosen programme.
7. Starting of the programme
The ON/OFF pushbutton " " enables to switch on
your machine. The control lamp lights on and the
programme begins.
8. At the end of the programme
When the selected programme is over, the machine
stops automatically. The timer knob stops on the
position "I" for the cotton programmes.
The synthetics programmes end by a rinse hold in
order to avoid the formation of creases. You can finish
OPERATING INSTRUCTIONS
" pushbutton or/and the
these programmes by a short spinning (programme
N) or by a draining (programme P). Depress the on/off
pushbutton " " before doing your choice.
After each wash, depress the on/off pushbutton " ".
Press off the pushbuttons if necessary ; unplug the
machine from the wall socket ; turn off the water tap.
- 9 -
A
Hide quick links:
Advertisement
Table of Contents
