Use Of Your Appliance; The Control Panel - Zanussi T803V Instruction Manual

The control panel

Never turn the programme selector when the appliance is working.
A. Programme selector
It enables to select the most adapted programme to
the nature and degrees of soil of your laundry.
Turn the programme selector clockwise to select the
chosen programme.
The programme selector indicates each programme
phase as it takes place.
At the end of the programme, the appliance stops
automatically on a position "I" for cotton programmes
or on a rinse hold position "
grammes.
Never turn the programme selector anticlockwise.
B. Temperature selector
It enables to choose the mosta adapted temperature
between cold ( ) and 90°C.
Choose the temperature which corresponds to the
chosen programme, with the help of the indications or
the programme table, according to the fibers and the
fastness of the colours.
C. Spinning speed variator
It enables to select the spinning speed of your washing
machine from " " (draining) to 800 rpm.
Thus, you can choose the spinning speed suiting best
to the nature of your laundry and to the degree of
humidity wished at the end of the wash.

USE OF YOUR APPLIANCE

D
" for synthetics pro-
C
D. Push buttons
= ON/OFF
Press the ON/OFF pushbutton, the programme starts
: the control lamp lights on.
Control lamp :
The control lamp lights on when the appliance is
working (on/off pushbutton " " pressed). It lights off
when the cycle is finished (programme selector on a
stop position).
HALF LOAD :
This pushbutton allows to wash small quantity of linen
not much soiled (2,0 kg) on the cotton programmes
only.
RINSE PLUS :
This pushbutton allows to add a rinsing on the cotton
programmes.
- 6 -
A
B