Cleaning; Maintenance - Zanussi ZCG 6605W User Manual

Gas freestanding oven
Table of Contents

Advertisement

Part 5 : CLEANING AND MAINTENANCE OF YOUR OVEN

5.1 CLEANING

Be sure that all control switches are off and your apparatus cooled before cleaning your oven.
Plug off the apparatus.
Control whether they are appropriate and recommended by the manufacturer before using the
cleaning materials on your oven. As they may damage the surfaces, do not use caustic
creams, abrasive cleaning powders, thick wire wool or hard tools. In case the liquids that
overflows around your oven burn, the enameled place may be damaged. Immediately clean
the overflew liquids.
Cleaning of Inside of Your Oven
Surely plug off the oven before starting cleaning
The inside of enameled oven is cleaned in the best way when the oven is warm. Wipe the
oven with a soft cloth that had been hemmed in soapy water after each use. Later wipe it with
a wet cloth once more and then dry it. It may be required to use a liquid cleaning material
from time to time and make a complete cleaning. Do not clean with dry and powder cleansers.
Cleaning of Your Oven's Cover
In order to be able to clean the cover of your oven from inside and outside, use a glass cleaner.
Then rinse, dry it with a dry cloth.
Cleaning of Gas Cookers, Hob Part
Lift up the saucepan carriers, hats and heads of cookers containing gas on upper part of your
oven. Wipe and clean the back panel with a soapy cloth. Wash the hats and heads of cookers
containing gas and rinse them. Pay attention to detents to pass and settle completely while
placing the back panels after drying. Do not clean the back panel with a wire for dirty dishes.
It causes the surface be scratched.
The enamel where the saucepan carriers touch to the flame on end parts, may get old and
shabby. The end parts of which the enamels get old and shabby do not cause to rust. Using
them

5.2 MAINTENANCE

Change of Oven Lamp
At first plug offthe oven and pay attention to oven is cool. Also remove the ampoule after
removing the cover in front of lamp. Affix the new ampoule resistant to 3000C to the place of
the ampoule that you removed (230 V, 25 Watt, Type E14). Replace the lamp protective glass.
Your oven will be ready for use after this process.
Other Controls
Periodically control the gas connection pipe. Even if any simple abnormality is felt, inform the
technical service to have it changed. We recommend it to be changed once a year.
If any abnormality is felt while operating the command switches of cooker and oven,
contact to the authorized service.
14

Advertisement

Table of Contents
loading

Table of Contents