Table of Contents
Advertisement
The electric cable must not touch to the hot parts of apparatus. The electric cable must not
touch the back part of the apparatus. Otherwise the electric cable of apparatus may be
damaged. And this situation may cause short circuit.
The producer firm declares that it has no responsibility against any kind of damages and
losses that emanate from the following security norms.
3.6 GENERAL WARNINGS AND MEASURES
Your apparatus is produced in accordance with the related security instructions connected
with electrical apparatus. The maintenance and repair works must be made just by the
authorized service technician who is trained by the producer company. The installation
and repair works without following rules may endanger you.
While your appliance operates, its outside surfaces heat up. The interior surfaces of oven,
components that ensures the heat and steam that goes out are quite hot. Even if the
apparatus is turned off, these parts hold its heat for a specific time. Do not touch onto the
hot surfaces. Keep children away.
Do not leave the cooker while cooking with solid or liquid oils. There may be flaming up on
condition of extreme heating. Never pour water to the flames occuring from oil. Cover the
saucepan or frypan with its cover in order to choke the flame that has occured in this
case and turn the cooker off.
The oven and heat adjustment switches must be adjusted for cooking in your oven.
Otherwise the oven does not operate.
when the door or drawer of oven is open do not leave anything on it . You may unbalance
your apparatus or break the cover.
Do not put heavy things or flammable, burnable goods (nylon, plastic bag,paper,cloth...etc)
into the lover drawer.
Plug the appliance off the electrical network when you do not use the apparatus and keep
the gas valve off.
Protect your apparatus against atmospheric effects. Do not leave it to effects such as sun,
rain, snow, powder...etc.
3.7 GAS CONVERSIONS
Caution : The following procedures must be undertaken by authorized service personel.
Changing Injectors :
The gas burners adapt to different types of gas, by replacing the corresponding injectors to
gas on use.
For this purpose, following steps should be performed.
Cut off the feeding gas flow and electric current.
Remove the cap and the adapter.
Unscrew the injectors.
Replace the injector with the ones corresponding to the type of gas that is going to be used,
according to the information chart.
8
Advertisement
Table of Contents
