Table of Contents
Advertisement
Troubleshooting
Why are there two wireless utilities in my system tray?
Which one should I use?
There are several features and advantages to using the WNU over
the Windows XP Wireless Zero Configuration utility. We offer a site
survey, detailed link information, and adapter diagnosis, to name a
few.
It's essential to know which utility is managing your adapter. We
recommend using the WNU. To use the WNU, follow the steps
below:
Step 1
Right-click on the network status icon in the system tray and
select "View Available Wireless Networks".
Step 2
Click on the "Advanced" button in the lower left-hand corner
of the "Available Wireless Networks" window.
Step 3
From the "Advanced" tab, uncheck "Use Windows to
configure my wireless network". Once the box is unchecked, click
"OK" to close the window.
You are now using the WNU to configure the Card.
The Card is not detected by operating system.
• The Card is not recognized by your desktop computer.
• The "New Hardware Wizard" does not appear when booting up
the computer.
• Receive Microsoft Error Code: 10
• Receive Microsoft Error Code: 0
If the "New Hardware Wizard" does not appear, or you receive
any of the above error codes, please attempt the following
troubleshooting steps:
1.
Remove the screws behind your computer case that secure the
computer cover and remove cover.
2.
Touch any metal part of the case to discharge static electricity,
which could damage your product or your computer.
3.
Remove the Card.
4.
Locate a different empty PCI expansion slot. It is usually white
in color.
5.
Confirm that the Card will fit into the slot you have chosen.
30
30
Advertisement
Table of Contents
