Pro-Ject Audio Systems 2 Xperience Basic + Instructions For Use Manual
Record player
Hide thumbs
Also See for 2 Xperience Basic +:
- Instructions for use manual (9 pages) ,
- Instructions for use manual (8 pages) ,
- Instructions for use manual (8 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Pro-Ject Audio Systems 2 Xperience Basic +
Summary of Contents for Pro-Ject Audio Systems 2 Xperience Basic +
- Page 1 INSTRUCTIONS FOR USE 2 Xperience Basic+ Pro-Ject...
- Page 2 Controls, features and connections 1/11 Power switch, motor unit with stepped drive pulley * Drive belt * Platter with felt mat * 4/44 Tonearm counterweight * and counterweight support rod Tonearm lift lever 6/66 Tonearm rest and removable transport locks 7/77 Tonearm tube with tonearm bearing housing and red coloured transport lock Anti-skating weight adjustment scale...
- Page 3 Pro-Ject 2 Xperience Basic + Dear music lover, thank you for purchasing a PRO-JECT AUDIO record player. In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse. Important notice.
-
Page 4: Connection To The Amplifier
Anti-skating force adjustment Hang the loop of the thread of the anti-skating weight in the groove of the anti-skating stub (8) corresponding to the downforce applied to your cartridge and feed the thread through the loop of the wire support (9). The anti-skating force must be adjusted corresponding to the downforce as follows: Downforce Groove in the stub (8) -
Page 5: Maintenance And Cleaning
Maintenance and cleaning Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic cloth. Never use a dry cloth because this will create static electricity which attract more dust! Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage to rubber parts. -
Page 6: Warranty
Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included. - Page 7 Red coloured transport lock Accessories Two tonearme transport locks Please remove feet bevore repacking Feet Counter weight Platter support Power supply Platter with felt mat Motor with black cover © Audio Trade GmbH · Pro-Ject 2 Xperience Basic +/ Pro-Ject Pick it MC-1H · Revision 2011.10.15/2011.10.15...