Zanussi ZC 540 AS Instruction Book page 19

Gas connection
Your cooker is delivered adjusted for the
kind of gas stated on the rating plate.
It might be necessary to pass to another
kind of gas, different to the one it is preset
to. Under these circumstances follow the
instructions bellow.
For best
consumption and a longer length of life of
your cooker, the manifold gas pressure has
to respect the values shown in table no. 1
If the appliance is supplied with GZ 50, GZ
35 or GPB gas check that from the pressure
regulator, the pressure for GZ 50 is 20
mbar, for GZ 35 is 13mbar and for GPB is
36 mbar.
Connection using a rigid pipe or a
flexible pipe (class 1).
1. For network gas:
Flexible, nonmetal pipe
•
Use a flexible rubber pipe non longer
than 1,5 m and inner diameter of 15 mm
mounted with its holder
•
Make sure it is well inserted and fix it by
means of a collar.
Flexible pipe
•
Flexible pipe (mechanic connection)
max length 1.5 m;
•
We advice to use a flexible pipe,
according to the national rule in force,
not shorter than 1 m, depending on the
position of the tap;
•
Connect one end of the pipe to the
blocking tap, than, before placing the
appliance between
connect the other end to the pipe
extension, inserting a gasket.
19
efficiency, lowest
the furniture,
Fitting
Connection
gas
Pipe
flexible
Necklace
Pipe
flexible
Pipe
flexible