Advertisement
2)
Check to see if you can access the Router's web management page. If you
can, please follow the following steps to solve the problem. If you can't, please
set your computer referring to section T3 then try to access the Internet again.
If the problem persists, please go to the next step.
3)
Make sure that you are connected to the TP-LINK Router with the computer
that was originally connected to your modem, then log on to the web-based
management page and browse to "Network > MAC Clone", click "Clone
MAC address" and then click "Save". The Router will then reboot and you
may try to access the Internet from your computer. If the problem persists,
please go to the next step.
4)
Some modems use the same LAN IP range (192.168.0.x) as TP-LINK Router,
it will cause IP address conflict between the two devices. To avoid the problem,
please log on to the web-based management page and browse to "Network >
LAN", change the default LAN IP address from 192.168.0.1 to 192.168.x.1 (x
can be any number from 1 to 254). Click the "Save" button. The Router will
then reboot and you may try to access the Internet from your computer. Please
note that the Router can only be accessed using the new LAN IP address
(192.168.x.1).
5)
Please feel free to contact our Technical Support if the problem persists.
17
Advertisement
