Lexmark C762 Datasheet page 8

Lexmark C762
Product Dynamics
Paper Handling:
Input:
The standard paper
supply on the Lexmark
C762 ranges from 600 to
3,100 sheets (including
the standard 100-sheet
multipurpose feeder).
The main paper trays
can accommodate paper
as heavy as 32 lb./120
gsm, up to legal size
(8.5" x 14").
Paper supplies can be
increased to a maximum
of 3,100 sheets — a
higher upgraded supply than competing
devices offer. Users can install up to three
500-sheet drawers or the optional 2,000-
sheet drawer.
Their is no exit restraint built into the paper
drawers, which means that users can pull the
drawer out of the device relatively easily. This
could result in a tray being dropped and being
damaged.
Output:
The standard 250-sheet
output capacity can be
increased to a total of 3,900
sheets by adding the 3,000-
sheet finisher and the 650-
sheet Output Expander.
Duplex Unit:
The duplex unit (optional on
some configurations) in the
Lexmark C762 is located in
the front of the printer,
between the paper drawer
and the paper tray. This
www.BERTL.com
tel. 732-761-2311
fax. 732-761-2312
info@BERTL.com
The duplex unit slots in below the uppermost
allows users easy access to clear paper
misfeeds, if they occur, without having to pull
the entire machine away from the wall to
access the duplex paper path.
500-sheet paper drawer for the Lexmark C762.
Copyright © 2003 BERTL, Inc. 30-Sep-04
All Rights Reserved. The license under which this document is made available and applicable law prohibit any
reproduction or further transmission of any portion of this document. This document may only be viewed elec-
tronically through the BERTL.com website and may not be stored in electronic or hard copy format. Any repro-
duction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or omissions
contained in this document.
Color at Work
paper drawer.
A standard adjustable
tm
Page Number 7