Xerox WorkCentre 7830 Specification page 10

Xerox WorkCentre™ 7830/7835/7845/7855
®
Walk-up Fax Features (Optional (Customer-installable) – 1 and 2 lines)
Compatibility
Speed / Modems
Compression / Speed
Resolution
Fax Send Features
Fax Receive Features
Fax Forward
Fax Reports
Auto Dialing
Device Management
Management Support
Xerox CentreWare Web
® ®
Novell NDPS/NEPS
Xerox Device Manager
®
Xerox Device Types for
®
SAP Environment
ITU (CCITT) Group 3
One or Two V.34 modems: 33,600 bps. Less than 4 seconds per page transmission time
ATA analogue terminal adaptor utilising T38 (optional)
MH/G3, MMR/SG3
Walkup Send:
Standard: 200 x 100 dpi
Fine: 200 x 200 dpi
Superfine: 600 x 600 dpi
Receive:
Accepts all sizes
LAN Fax (fax from print driver)
Auto Fax Transmission Reduction
Page-by-page Job Status at the Machine
Delay Start, Build Job, Favourites
Automatic Memory Resend
Automatic Cover Sheets
Pstn Fax
Device Address Book (up to 1,000 contacts)
One- or Two-sided Printing
Stapled or Unstapled
Receive Print Mode – Manual (size, margin, stock, header) / Auto
Output Tray Selection
Junk Fax Prevention
Up to 200 Password Protected Mailboxes
Secure Receive
Receive Timestamp
Auto Answer Delay
Forward to Email or SMB Location
Fax Forward on Receive Only
Activity, Dial Directory, Group Directory, Transmission Confirmation, Pending Fax, Options Report, On Demand
Overwrite Report, Mailbox Report, Broadcast Report
Speed Dials: 5,000 total (one- or two-line options)
Group Dials: Up to 200 groups with up to 400 recipients per group (one- or two-line options)
Auto Redial: Up to 14 attempts (per country requirements)
• 1 to 25 minute intervals
• Batch send (up to memory capacity)
SNMP Version 1. SNMP Version 2c and SNMP Version 3 trap over TCP/IP and IP
MIB access (IETF-MIBII RFC 1213), Host Resources
MIB RFC 2790, Printer MIB RFC 1759 v.2
A Web-based server application for network administrators that permits Web browser-based device management
from any workstation, whether running Windows, UNIX or any other operating system:
• Works with any SNMP-managed printer from any manufacturer.
• Provides help with device discovery and installation, health checks and troubleshooting, and device upgrades, as
well as basic accounting and asset management.
• Requires Windows XP, Vista or Windows 7 and Internet Explorer 6.0 and higher.
• CentreWare Integration available for Tivoli
HP OpenView
® ®
Server gateway application: centralised management tool.
Xerox Device Manager collects and manages the data that drives fact-based decisions for your enterprise device
®
management environment. It is a single tool to install print queues and configure, manage, monitor and report
on both networked and locally connected devices – regardless of vendor – across your enterprise. Xerox
Manager provides:
• Device monitoring and troubleshooting
• Extensive reporting and discovery of new devices
• Usage collection, chargeback and billing capabilities
Xerox, together with SAP through our Gold-level membership in the SAP Printer Vendor Programme, provides
seamless connectivity between SAP systems and your Xerox
customer you benefit from having SAP-certified Xerox
model. SAP-certified device types for Xerox
www.office.xerox.com/software-solutions
NetView , Unicentre TNG
® ®
printers and multifunction systems. And as an SAP
®
device types available right from SAP's online delivery
®
printers and multifunction systems are available to download.
®
, Microsoft Management Console (MMC),
®
Detailed Specifications
Device
®
10