Switching Off The Child Safety Device; Overriding The Child Safety Device - Zanussi ZVT 64 X Installation And Operating Instructions Manual

Switching off the child safety device

Step
1.
Switch on appliance (Do not
set a heat setting).
2.
Touch
at the front simultaneously for 4
seconds.
3.
Switch appliance off.
The child safety device is switched off.
The child safety device can only be switched on and off, if no heat setting is
set.

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking
session; it remains activated afterwards.
Step
1. Switch appliance on
2.
Touch
at the front simultaneously for 4
seconds.
Until the appliance is next switched off, it can used as normal. After
switching off the appliance, the child safety device is active again.
After overriding the child safety device, a heat setting or a function must be
set within approx. 10 seconds, otherwise the appliance automatically
switches itself off.
Control panel
of both the cooking zones
Control panel
of both the cooking zones
Display/Signal
Display/Signal
9