Diagnostics Screen - Trane Tracer CH530 User Manual

RLC-SVU05A-E4
DynaView Interface

Diagnostics Screen

The diagnostic screen is accessible
by depressing the Alarms
enunciator. A verbal description will
be provided. A scrollable list of the
last (up to 10) active diagnostics will
be presented.
Performing a Reset All Active
Diagnostics will reset all active
diagnostics regardless of type,
machine or refrigerant circuit.
Compressor diagnostics, which hold
off only one compressor, will be
treated as circuit diagnostics,
consistent with the circuit to which
they belong.
Figure 12 - Diagnostics screen
Rfgt
Operating Mode At Last Diagnostic:
[01] 10:56 PM Nov 26, 2001
Low Chilled Water Temp: Unit Off
[02] 10:55 PM Nov 26, 2001
Low Evaporator Temp: Unit Off
Auto
The scrollable list will be sorted by
time of occurrence. If a diagnostic
of severity = warning is present, the
"Alarms" key will be present but not
flashing. If a diagnostic of severity =
shutdown (normal or immediate) is
present, the "Alarm" key will display
that is flashing. If no diagnostics
exist, the "Alarm" key will not be
present.
The "Operating Mode At Last
Diagnostic" text above the most
recent diagnostic will display a sub-
screen listing the operating mode
and submodes at the time of the
last diagnostic.
Setpoint Diagnostic
Reset Diags
Stop Alarms
27