Table of Contents
Advertisement
P
I
When the received audio phase is reversed, the SM-5000 gives depth to the audio sound.
1. If needed, press both [ CONTRAST ( + )] and [ CON-
TRAST ( – )] switches to change the adjustment mode to
"Audio Setting".
The Audio Setting window will appear on the display.
Note: Pressing of the
switch will store the last selected "Contrast Setting Mode"
or "Audio Setting Mode" to memory.
2. Press the [ CONTRAST ( + )] switch to toggle the audio
phase "ON (reversed phase)" or "OFF (normal response)".
3. A few seconds after pressing the [ CONTRAST (+)]
switch, the Audio Setting window will close.
A
C
You may adjust the contrast for best viewing in sunlight, dusk, or night allowing for best readability.
1. If needed, press both [ CONTRAST ( + )] and [ CON-
TRAST (–)] switches to change the adjustment mode to
"LCD Contrast Setting".
The Contrast window will appear on the display.
Note: Pressing of the
switch will store the last selected "Contrast Setting Mode"
or "Audio Setting Mode" to memory.
2. Press the [ CONTRAST ( + )] switch to increase the con-
trast of the display.
3. Press the [ CONTRAST (–)] switch to reduce the contrast
of the display.
4. A few seconds after pressing the [ CONTRAST ( + )] /
[ CONTRAST (–)] switch, the Contrast window will close.
S
S
D
You may turn off the Spectrum Scope Display.
1. Press and hold the FT
DX
engage the Scope Menu mode.
The SUB DISPLAY- window will show the Group name
(SCOPE), while the SUB DISPLAY- window will show
the Menu item. The SUB DISPLAY-
the current setting of the currently-selected Menu item.
2. Rotate the ( VFO-A )[ SELECT ] knob to select the Menu
item "DISPLAY", then rotate the ( VFO-B )[ SELECT ]
knob to select "OFF".
The Spectrum Scope Display turns off.
3. Press the [ C.S ] key briefly to save the new setting and
exit to normal operation.
To turn the Spectrum Scope Display on, repeat the above pro-
cedure, rotating the ( VFO-B )[ SELECT ] knob to select "ON"
as in step "2" above.
A
D
"ON/OFF"
5000 [ C.S ] key for 2 seconds to
window shows
S
S
A
:
When a contrast level is too high, it is difficult to watch the
"Average" and "Peak hold" indication (See page 3).
D
5000 [ DIM ] button is pressed, the il-
When the FT
DX
lumination level of the SM-5000 will also be reduced.
The amount of brightness may be set via FT
Menu item "011 DISP DIM ELCD".
-7-
[ CONTRAST (–)] Switch
[ CONTRAST ( + )] Switch
[ CONTRAST (–)] Switch
[ CONTRAST (+)] Switch
[ C.S ] Switch
( VFO-A )[ SELECT ] Knob
( VFO-B )[ SELECT ] Knob
D
5000
DX
Hide quick links:
Advertisement
Table of Contents
