Advertisement
P
I
HASE
NVERSION
When the received audio phase is reversed, the SM-5000 gives depth to the audio sound.
1. Press and hold both [ CONTRAST ( + )] and [ CON-
TRAST ( – )] switches for 2 seconds to engage the Audio
Setting mode.
The Audio Setting window will appear on the display.
2. Press the [ CONTRAST ( + )] switch to select "ON
3. Press both [ CONTRAST ( + )] and [ CONTRAST ( – )]
switches to exit from the Audio Setting mode.
To return to normal audio response, repeat the above proce-
dure, pressing the [ CONTRAST ( + )] switch to select "OFF
in step "2" above.
A
C
DJUSTING THE
ONTRAST
You may adjust the contrast for best viewing in sunlight, dusk, or night allowing for best readability.
Press the [ CONTRAST ( + )] switch to increase the con-
trast of the display.
Press the [ CONTRAST ( – )] switch to reduce the contrast
of the display.
A
:
DVICE
When a contrast level is too high, it is difficult to watch the
"Average" and "Peak hold" indication (See page 3).
S
S
D
PECTRUM
COPE
ISPLAY
You may turn off the Spectrum Scope Display.
1. Press and hold the FT
DX
engage the Scope Menu mode.
The SUB DISPLAY- I window will show the Group name
SCOPE
SCOPE
SCOPE), while the SUB DISPLAY- II window will show
SCOPE
(SCOPE
the Menu item. The SUB DISPLAY- III window shows
the current setting of the currently-selected Menu item.
2. Rotate the ( VFO-A )[ SELECT ] knob to select the Menu
DISPLAY
DISPLAY
DISPLAY
DISPLAY", then rotate the ( VFO-B )[ SELECT ]
item "DISPLAY
OFF".
OFF
OFF
OFF
knob to select "OFF
The Spectrum Scope Display turns off.
3. Press the [ C.S ] key briefly to save the new setting and
exit to normal operation.
To turn the Spectrum Scope Display on, repeat the above pro-
cedure, rotating the ( VFO-B )[ SELECT ] knob to select "ON
as in step "2" above.
A
ON
ON
ON".
ON
D
ISPLAY
"ON/OFF"
5000 [ C.S ] key for 2 seconds to
S
UDIO
ETTING
OFF
OFF"
OFF
OFF
S
ETTING
ON
ON
ON
ON"
When the FT
lumination level of the SM-5000 will also be reduced.
The amount of brightness may be set via FT
Menu item "011 DISP DIM ELCD".
-7-
[ CONTRAST (–)] Switch
[ CONTRAST (–)] Switch
[ C.S ] Switch
( VFO-A )[ SELECT ] Knob
( VFO-B )[ SELECT ] Knob
D
D
ISPLAY
IMMER
5000 [ DIM ] button is pressed, the il-
DX
[ CONTRAST ( + )] Switch
[ CONTRAST (+)] Switch
5000
DX
Advertisement
