Table of Contents
Advertisement
Speaker
Dual 2.6" x 1" (65 x 25 mm) oval speakers direct the sound
toward the front. The audio response is specially tailored
for shortwave reception.
Independent Left or Right mute capability is provided for
VFO-A and VFO-B on the Station Monitor, without chang-
ing any settings on the transceiver.
Display
This LCD Monitor displays the Spectrum Scope of VFO-
A band activity.
[ CONTRAST ]( [ + ] / [–] ) Switch
These switches are used for adjustment of the LCD Con-
trast Setting and the Audio Setting.
Press both switches simultaneously, to toggle the adjust-
ment mode between "LCD Contrast Setting" and "Audio
Setting".
Refer to page 6 for the details of the "Audio Setting", and
refer to page 7 for the details of the "LCD Contrast Set-
ting".
DC IN +13.8V Jack
Connect the supplied DC cable between this jack and
+13.8V jack on the FT
5000 transceiver.
DX
V-AF Jack
Connect the supplied connection cable between this jack
and V-AF jack on the FT
DX
EXT SPKR Jacks
Connect the external speakers to these jacks, if desired.
Inserting a plug into the A jack disables the left side speaker
of the SM-5000. Similarly, inserting a plug into the B
jack disables the right side speaker of the SM-5000.
F
P
R
P
5000 transceiver.
S
[ A+B ] Switch
Selects the speaker output mode during Dual Receive op-
eration.
When this switch is un-pressed (
produces audio from the VFO-A receiver, while the right
speaker produces audio from VFO-B receiver.
When this switch is depressed (
the VFO-A and VFO-B receivers is produced by both
speakers.
N
:
1) Requires FT
HEADPHN" be set to "SEPARATE".
2) When receiving only VFO-A or VFO-B, the audio is
routed to both speakers, regardless of the switch position.
[ MUTE-A ] / [ MUTE-B ] Switches
The [ MUTE-A ] switch allows you to mute the audio from
the VFO-A receiver. Similarly, the [ MUTE-B ] switch al-
lows you to mute the audio from the VFO-B receiver.
This can be particularly useful during Dual Receive op-
eration, when you want to concentrate on just one receiver
for a moment.
C
[ PGM ] Switch
This slide switch is used for updating the SM-5000 firm-
ware. The update software and instructions are available
for download from the Vertex Standard website (http://
www.yaesu.com/).
TO DMU Jack
To use the optional DMU-2000 Data Management Unit
at the same time, connect the cable supplied with the DMU-
2000 between this jack and the TRX jack on the DMU-
2000.
FROM TRX Jack
Connect the supplied control cable between this jack and
the DMU jack on the FT
- 2 -
), the left speaker
), mixed audio from
5000 Menu item "108 ROUT
DX
5000 transceiver.
DX
Hide quick links:
Advertisement
Table of Contents
