Advertisement
Quick Links
Thank you for your purchase. The SM-5000 Station Monitor provides a visual display of the VFO-A band spectrum. Both strong
and weak signals are clearly depicted. The integrated stereo speakers provide comfortable receiver audio.
Do not modify this equipment.
Do not place this equipment in a location exposed to dust and/or high humidity.
Do not expose the SM-5000 Station Monitor to direct sunlight or excessive temperatures.
Before installing the SM-5000, turn off the Main Power Switch on the
rear panel of the FT
5000.
DX
SM-5000
FT
5000
DX
V-AF Cable supplied with SM-5000
(
DC POWER Cable supplied with SM-5000
(
SM-5000
FT
5000
DX
V-AF Cable supplied with SM-5000
(
DC POWER Cable supplied with SM-5000
(
S
TATION
SM-5000
O
PERATING
S
AFETY
)
)
)
)
M
ONITOR
M
ANUAL
I
NFORMATION
I
NSTALLATION
Mini-DIN Cable supplied with SM-5000
(
)
Mini-DIN Cable supplied with SM-5000
(
)
Mini-DIN Cable supplied with DMU-2000
-1-
S
P
I
IDE
LATE
NSTALLATION
If the SM-5000 will be placed on top of
the FT
5000, attach the supplied Side
DX
Plates on both sides of the SM-5000 with
the supplied screws.
"L" mark ( Bottom side )
"R" mark ( Bottom side )
Note the left and right orienta-
tion of the Side Plates and in-
stall them correctly.
DMU-2000
KEYBOARD
MONITOR
(
)
Advertisement
Related Manuals for Yaesu SM-5000 - COMPUTER
Summary of Contents for Yaesu SM-5000 - COMPUTER
- Page 1 TATION ONITOR SM-5000 PERATING ANUAL Thank you for your purchase. The SM-5000 Station Monitor provides a visual display of the VFO-A band spectrum. Both strong and weak signals are clearly depicted. The integrated stereo speakers provide comfortable receiver audio. AFETY NFORMATION ...
-
Page 2: Rear Panel Connections
5000 transceiver. ware. The update software and instructions are available for download from the Vertex Standard website (http:// V-AF Jack www.yaesu.com/). Connect the supplied connection cable between this jack TO DMU Jack and V-AF jack on the FT 5000 transceiver. - Page 3 BOUT THE PECTRUM COPE The SM-5000 Spectrum Scope provides a visual display of an amateur band segment tuned by the VFO-A receiver. The default bandwidth allows you to see both strong and weak signals clearly depicted on the monitor screen. During transmission, the transmitter’s waveform will be displayed, except when the frequency span is set to 2500 kHz in the CTR (Center) display mode or set to 1000/2500 kHz in the FIX (Fixed) display mode.
- Page 4 LBWS ( L SING THE IMITED IDTH WEEP UNCTION LBWS (Limited Band Width Sweep) is a function that sweeps a limited segment of the Spectrum Scope span without changing the span (bandwidth). As the sweep segment becomes narrower, the speed becomes faster, and the accuracy and resolution are enhanced.
-
Page 5: Using The Fix ( Fixed ) Mode
FIX ( F SING THE IXED The FIX mode is convenient when you want to monitor an entire amateur band. 131 SCP 131 SCP 5000 Menu items (“131 SCP 131 SCP 131 SCP The starting point, located at the left edge of the screen, can be set for each amateur band via FT 1.8 FIX 1.8 FIX 141 SCP 50.0 FIX... -
Page 6: Audio Setting
UDIO ETTING UDIO UTING The Audio Mute feature be particularly useful during Dual Receive operation, when you want to concentrate on just one receiver for a moment. [ MUTE-A ] Switch Press the [ MUTE-A ] switch to toggle the VFO-A receiver [ MUTE-B ] Switch audio “on”... -
Page 7: Display Setting
UDIO ETTING HASE NVERSION When the received audio phase is reversed, the SM-5000 gives depth to the audio sound. [ CONTRAST (–)] Switch 1. If needed, press both [ CONTRAST ( + )] and [ CON- [ CONTRAST ( + )] Switch TRAST ( –... - Page 8 VERTEX STANDARD CO., LTD. VERTEX STANDARD US Headquarters All rights reserved 10900 Walker Street, Cypress, CA 90630, U.S.A. YAESU UK LTD. No portion of this manual Unit 12, Sun Valley Business Park, Winnall Close may be reproduced without Winchester, Hampshire, SO23 0LB, U.K.