Princeton VL1514 Reference Manual page 4

Installing the Monitor
DO NOT install the monitor where sudden temperature changes may occur, or in
humid, dusty, or smoky areas as it may cause fire, electric shock or damage.
DO NOT place your LCD Monitor near a window as it may be severely damaged if
exposed to rain, water, moisture, or sunlight.
MAINTAIN good ventilation; covering of ventilation slots or holes may cause fire.
PLACE the monitor at least 4" (or 10 cm) way from the walls.
SAFE storage temperature of the LCD Monitor is in a range of –20 to +65℃.
HOW TO INSTALL YOUR LCD MONITOR
1) Assemble the base plate included in the accessory kit.
Hold the base plate with
one hand and the stem of
the monitor with the other
hand (the monitor should
be in an upright position).
2) Check and make sure that the Signal Cable is connected to the PC Video card.
3) Plug the female end of the 1.8m power cord into the AC adaptor. Then, plug
the DC connector of the adaptor to your monitor's DC jack.
4) When you've completed the above steps, connect the male end of the power
cord into a wall socket.
NOTE
For added protection, it is recommended to use a Surge Protection device plugged between the
AC Adapter and the electrical wall outlet to prevent the effects of sudden current variations
from reaching the LCD Monitor. Sudden peaks of electricity may cause damage to the Monitor.
Position the monitor with the back facing you;
secure the base plate with your fingers and push
the stem of the monitor in towards you with your
thumbs. When you hear a click sound, then it is
securely locked-in. (check and make sure that
the security clip is properly locked-in).
Audio in
Connect with your audio device.
(optional)
Signal cable Connected with PC Video card
DC Jack Plug into the AC power adapter.
2
Gently slide the stem
of the monitor into
the base plate slot.