Steam Ironing - Beko BKK 2174 User Manual

4 Operating the product

4 3 Steam ironing

1. Place the appliance on an even, dry
and nonslip surface. The non-slip
feet "22" ensure the stability of the
appliance.
2. Fill the water tank as described
in the section "Filling in the water
tank".
3. Insert the power plug "7" into the
wall socket.
4. Push the On/Off switch "20" to
switch on the steam ironing station.
– The power indicator "14" lights
up red and the ECO indicator light
"17" illuminates green.
5. Adjust the temperature control dial
"12" to the desired temperature.
– The temperature indicator light
"3" lights up blue. The blue tem-
perature indicator light "3" re-
mains on while the iron is heating
up. As soon as the iron reaches
the set temperature, the tem-
perature indicator light goes off.
The temperature indicator light
will go on and off during usage to
indicate that the set temperature
is being regulated.
C
Steam ironing is only
possible at higher
temperature settings
between •• and MAX.
14 / 37 EN
6. The water in the water tank heats
up within 3 minutes. As soon as the
temperature indicator light goes off
and the control indicator in "3" the
steam button remains lit, the steam
iron is ready to use. Hold the iron in
horizontal position on the garments
and press the steam jet button "13"
Continue to move the iron when
ironing.
A
WARNING: Never
direct the steam at
people or pets.
When the steam iron-
ing station is switched
on it will produce a
C
'pumping' sound. This
is normal and indicates
that water is being
pumped from the water
tank into the steam iron-
ing station.
7. Set the desired steam pressure
ECO, MEDIUM or HIGH by using the
steam adjusting button "21".
– The corresponding control indi-
cator in the steam button blinks
as soon as it is selected. After
approx. 2 minutes the control
indicatorm will remain lit, indicat-
ing that the appliance is ready for
steam ironing.
Steam Iron Station / User Manual