Beko BKK 2174 User Manual page 15

4 Operating the product
8. When there is insufficient water
left in the water tank "8" the steam
generation stops and the water fill-
ing indicator "16" lights up, followed
by an audible beep. The control
indicator of the selected steam but-
ton goes off. Place the iron onto the
storage base and refill the water
tank (see section Filling in the water
tank).
9. After ironing process is complete,
place the iron onto the storage
base.
10. Press and hold down the On/Off
switch "20" of the steam ironing
stati on for a few seconds to switch
the steam ironing station off. Set the
temperature control dial to MIN and
disconnect the plug from the power
outlet.
11. Let the appliance cool down in a
location that is safely out of reach
of children.
A
WARNING: Never
touch the hot soleplate
with bare hands.
Danger of Burns!
Steam Iron Station / User Manual
If the steam function
has not been used for
some time the water
condensed in the
steam hose transforms
into water. When
restarting the steam
ironing station again, it
could cause spluttering
C
of the unit and water
droplets at the sole-
plate. In order to avoid
these droplets falling
onto your garments we
recommend using an
old clean cloth in the
beginning. Press the
steam jet button "13"
until the droplets disap-
pear and normal steam
will be produced.
• If dirt particles escape from the
soleplate, clean the steam ironing
station according to the instruc-
tions in section "Maintenance and
cleaning".
• The steam ironing station will auto-
matically switch off if no button or
any other control element has been
activated for a period of 10 minutes.
15 / 37 EN