Intercom; Place A Dedicated Intercom Call; Place A Dialable Intercom Call - Cisco 8941 User Manual

Visual confirmation displays briefly.
2. Press the button again to sign out.
Signing out of a hunt group does not prevent non-hunt group calls from ringing your phone.

Intercom

Intercom allows you to place and receive one-way calls using a dedicated or dialable intercom line.
When you place an intercom call, the recipient's phone auto-answers with mute activated (whisper
mode) and broadcasts your message through the recipient's speakerphone, or through the headset or
handset, if one of these devices is active.
After receiving the intercom call, the recipient can initiate two-way audio (connected mode) to allow
for further conversation.

Place a Dedicated Intercom Call

1. Press the Intercom button.
Your phone enters whisper mode until the recipient accepts the intercom call. If you are on an
active call, that call is placed on hold.
2. Listen for the intercom alert tone, then begin speaking.
3. Press the Intercom button to end the call.

Place a Dialable Intercom Call

1. Press the Intercom button.
2. Enter the intercom code.
Your phone enters whisper mode until the recipient accepts the intercom call. If you are on an
active call, that call is placed on hold.
3. Listen for the intercom alert tone, then begin speaking.
4. Press the Intercom button to end the call.
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
Calling Features
55