Setting Up Your Encryption Device; Secure Terminal Equipment (Ste) - GateWay Fax Systems 90si User Manual

GateWay Fax Systems, inc.
2.6

Setting Up Your Encryption Device

The following sections provide step-by-step procedures for setting your secure telephone / encryption device for
Asynchronous 9600bps secure data mode.
2.6.1 L-3 Secure Terminal Equipment (STE)
Objective: To set the secure data mode to Asyncronous 9.6Kbps.
For STE's with software V2.3 or earlier:
While On-Hook (to permanently set)
Press
MODE
CHANGE
CHANGE
SCROLL
SCROLL (until)
MODE
For STE's with software V2.4 and later:
While On-Hook (to permanently set)
Press
MODE
SCROLL
CHANGE
CHANGE (until)
SCROLL
SCROLL (until)
MODE
Note that to permanently set the Secure Data mode, the handset must be on-hook. If you do these procedures with
the handset off-hook, the changes hold for the current call only. When you hang up, the Secure Data settings will
revert to the previous settings.
www.gwfs.com, 877-951-9800, info@gwfs.com
Display
(Example) SECURE DATA: S19.2 (Synchronous, 19.2Kbps)
Secure Data Synchronous
Secure Data Asynchronous (Sets Asynchronous)
(Example) 19.2 Kbps
9.6 Kbps
(blank display)
Display
SECURE SIGNALLING MODE: STE/STU
SECURE DATA: /STU SECURE VOICE
(Example) SECURE DATA: S19.2 (Synchronous, 19.2Kbps)
SECURE DATA: Asynchronous
(Example) 19.2 Kbps
9.6 Kbps
(blank display)
help line: 877-951-9814
Model 90si Secure Fax Gateway User's Guide
page 12