Aligning the Print Head (part 2)
2 2 2 2
Select a pattern sample for "Pattern B".
Look at the chart B on your test chart. Select the
number under the pattern sample, in which
located the closest to the centre of the two horizontal
lines.
Example:
-8
-7
-6
-5
-4
3 3 3 3
Select pattern samples for "Pattern C" and
"Pattern D" respectively.
Look at the chart C and D on your test chart. Select the
numbers under the pattern samples, which have the
straightest lines.
Example:
Cracked line
-6
-5
-4
How to Use the
Printer Properties
Online Manual
-6
+8
B
-3
-2
-1
0
+1 +2 +3 +4 +5 +6 +7 +8
-6
+1
Straight line
C or D
-3
-2
-1
0
+1 +2 +3 +4 +5 +6
Print
6 6 6 6
Click the "OK" button in the "Align print head"
dialog box.
The print head will align itself.
is
! If you cannot find any satisfactory pattern sample for
each of "Pattern A" to "Pattern D" settings, select the
best ones among the printed pattern samples, and
then go back to step 3.
! The printer cannot perform other operations while
aligning the print head.
Print Status
Sharing Printer
Window
Maintenance
44
Maintenance
Troubleshooting