Front Load Washer
P roduct Type:
Coin SFNNCRSP111TW01
Model:
Card SFNNYRSP111TW01
Front Control With
Operation:
Electronic Display
1.
Cabinet Finish
– Cabinet shall be galvanized
steel with zinc phosphate pre-treat. Topcoat
shall be high base polyester powder.
43" height x 26 7 /8" width x 28" depth.
2.
Size –
3.
Load Capacity –
18 lbs.
4.
Cylinder Volume –
5.
Outer/Inner Cylinder Material –
wash basket and outer tub assembly shall be
made of stainless steel that will not chip, rust
or corrode.
6.
Inlet Hoses –
Inlet hoses shall be four feet in
length and able to withstand 600 psi
hydrostatic pressure at 190° Fahrenheit.
7.
Motor –
1 HP induction motor with
electronic overload protection and reversing
wash action.
8.
Spin Speeds –
The unit shall feature
three-speed distribution to ensure proper load
balancing and maximum water extraction.
9.
Wash Speeds –
Shall have two wash speeds to
properly launder all fabrics.
Multi-Housing
RFP Bid Specifications
2.84 cu ft.
Both inner
Commercial Built to Last Longer
Coin Drop
SFNNCRSP111TW01
10.
Extract/G-Force –
RPM final spin extract generates 300 G-Force
that maximizes water removal from clothes
for faster drying.
11.
Water Consumption –
U.S. Department of Energy compliant to
commercial washer standards for saving
energy and water.
- ENERGY STAR® qualified.
- CEE Tier 3 rated
- Modified Energy Factor (MEF) 2.46
- Water Factor (WF) 3.83
12.
Front Control Panel –
be located in the front of unit for customer
convenience and Americans with Disabilities
Act (ADA) compliant with side reach
exception for 36" over obstruction
cabinet top.
13.
See-Through Door –
loading and unloading. The hinge is a robust
10" steel piano style to maintain door
alignment.
™
High speed extract. 1000
10.9 gal per cycle.
The control panel shall
With 180°swing for easy
™
™
Need help?
Do you have a question about the Coin SFNNCRSP111TW01 and is the answer not in the manual?
Questions and answers