At The End Of The Programme; Automatic Washing And Drying; Drying Only - Zanussi W802 Instruction Booklet

6. Select the programme and start it
Turn the programme selector dial clockwise to
the required wash programme and press the
ON/OFF button : the operating pilot light
comes on and the machine starts to operate.

7. At the end of the programme

The machine stops automatically.
If you have selected a gentle programme which
ends with water in drum, drain the water before
opening the door by selecting programme J
(short spin) or P (drain).
It is normal to have to wait for about 2 minutes
before being able to open the door to allow the
safety lock to release.
Depress the ON/OFF button to switch the
machine off. The operating pilot light goes out.
Remove the laundry.
Turn the drum by hand to make sure it is
completely empty, so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of
whites.
Release any button which has been depressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.

Drying only

Warning! Do not exceed the maximum laundry
loads:
- 2.75 kg for linen and cottons
- 2 kg for synthetics.
The water tap must be open and the drain hose
must be positioned in the sink or connected to
the drain pipe.
1. Load the laundry
2. Select the drying programme F (for cotton) or
K (for synthetics).
3. Select the drying time in the black or grey
section of the selector, according to the fabrics
(cotton or synthetics) to dry.
4. Press the ON/OFF button
programme.
5. At the end of the cycle press the ON/OFF
button again to switch the appliance off.
6. Remove the laundry.

Automatic washing and drying

(NON-STOP programme)
Warning! For NON-STOP programmes, it is also
essential not to exceed the maximum load sizes
of 2.75 kg for cotton and 2 kg for synthetics.
1. Load the laundry.
2. Add detergent and additive.
3. Select the wash programme.
4. Select the drying time.
5. Start the programme by depressing the
6. At the end of the programme press the
7. Remove the laundry.
to start the
Do not use dosing device/ball when
carrying out a NON-STOP programme. The
plastic material with which it is made
cannot withstand the high temperature in
the drum during drying.
ON/OFF button.
ON/OFF button again to switch the machine
off.
17