At The End Of The Programme - Zanussi ZWT 71401 WA User Manual

Hide thumbs Also See for ZWT 71401 WA:
Table of Contents

Advertisement

Available languages

Available languages

CAUTION! If the temperature and
level of the water in the drum are too
high and the drum still rotates, you
cannot open the door.
To open the door during the first minutes of the
cycle or when the Inicio Diferido operates:
1. Press the button Inicio/Pausa to pause the
appliance.
2. Wait until the indicator Puerta/Porta goes off.
3. You can open the door.
4. Close the door and touch the button Inicio/
Pausa again. The programme (or the Inicio
Diferido) continues.

AT THE END OF THE PROGRAMME

The appliance stops automatically.
The acoustic signal operates (if it is activated).
In the display
comes on.
The indicator of the button Inicio/Pausa goes
off.
The door lock indicator Puerta/Porta goes off.
Turn the programme knob to position
deactivate the appliance.
You can open the door.
Remove the laundry from the appliance. Make
sure that the drum is empty.
Close the water tap.
Keep the door and the detergent drawer ajar, to
prevent the mildew and odours.
The washing programme is completed, but
there is water in the drum:
The drum turns regularly to prevent the creases
in the laundry.
The indicator Agua en cuba/Cuba cheia stays
on to remind you to drain the water.
The door lock indicator Puerta/Porta is on. The
indicator of button Inicio/Pausa flashes. The
door stays locked.
You must drain the water to open the door.
Draining the water:
1. To drain the water.
Set a Descarga or a Centrifugar
programme.
Press the button Inicio/Pausa. The
appliance drains the water and spins.
2. When the programme is completed and the
door lock indicator Puerta/Porta goes off, you
can open the door.
3. Turn the programme knob to the position
deactivate the appliance.
STAND BY
Some minutes after the end of the washing
programme, if you do not deactivate the appliance,
the energy saving status activates. The energy
saving status decreases the energy consumption
when the appliance is on the standby:
All indicators and the display go off.
The indicator of button Start flashes slowly.
Press one of the buttons to deactivate the energy
saving status.
At the end of the programme
The appliance stops automatically.
The acoustic signal operates (if it is activated).
In the display
The indicator of the button Inicio/Pausa goes
off.
The door lock indicator Puerta/Porta goes off.
Turn the programme knob to position
deactivate the appliance.
You can open the door.
Remove the laundry from the appliance. Make
sure that the drum is empty.
to
Close the water tap.
Keep the door and the detergent drawer ajar, to
prevent the mildew and odours.
The washing programme is completed, but
there is water in the drum:
The drum turns regularly to prevent the creases
in the laundry.
The indicator Agua en cuba/Cuba cheia stays
on to remind you to drain the water.
The door lock indicator Puerta/Porta is on. The
indicator of button Inicio/Pausa flashes. The
door stays locked.
You must drain the water to open the door.
Draining the water:
1. To drain the water.
Set a Descarga or a Centrifugar
programme.
Press the button Inicio/Pausa. The
appliance drains the water and spins.
2. When the programme is completed and the
door lock indicator Puerta/Porta goes off, you
can open the door.
3. Turn the programme knob to the position
deactivate the appliance.
to
comes on.
to
to
13

Advertisement

Table of Contents
loading

Table of Contents