Attachment Usage - Dirt Devil Hand Vac Instruction Manual

NOTE: Always turn off appliance before connecting or disconnecting attachments.
REMOVE DETACHABLE POWER NOZZLE
1.
Press the power nozzle
release button.
REATTACH POWER NOZZLE
1.
Line up tabs with grooves
and slide until the power
nozzle locks into place.
REATTACH HOSE
1.
Reattach hose by lining up
tabs on power nozzle with
grooves on hose and push
into place.
2.
Insert crevice tool into the
end of hose.

ATTACHMENT USAGE

2.
Remove by sliding power
nozzle to the right.
HOSE USAGE
1.
Turn hose locking ring to the
unlock position (clockwise).
2.
Secure by turning locking
hose ring to the lock position
(counter clockwise).
3.
Use crevice tool to clean
tight corners.
3.
Power nozzle with revolving
brushroll allows you to clean
in hard to reach places.
2.
Pull hose out of power nozzle
and away from unit.
CREVICE TOOL USAGE
1.
Remove crevice tool from
the back of unit.
REPLACE CREVICE TOOL
4.
Replace crevice tool by lining
up tab in crevice tool with slot
in crevice tool storage.