How To Assemble; How To Operate; Attachment Usage - Dirt Devil Power Flex Owner's Manual

HOW TO ASSEMBLE

1.
Push handle down onto top of
unit.
NOTE: Make sure dirt container is in place before operating.
CORD STORAGE/
REMOVAL
1.
Turn Quick Cord Release for
easy cord removal. Plug into
an electrical outlet.

ATTACHMENT USAGE

1.
Pull hose connect port down.
Located on the front of the dirt
cup. Gently slide the hose into
hole until it clicks into place.
2.
Secure handle with the 1
(one) screw supplied.

HOW TO OPERATE

2.
Turn cleaner on. Switch locat-
ed on the side of cleaner.
2. 2a.
To use crevice tool: remove
brush from end (2). Reattach
(2a) for dusting (store brush
on handle - see fig. 2, pg. 5).
6
3.
A
B
Place tools into their storage
position. (A) Hose & (B)
Upholstery tool.
3.
Use the Flex Edge ™ to reach
into corners. Gently push
into corner and edges will
mold to the corner.
3.
To remove hose, push down
on door and pull the end out
of the front of cleaner.