Removing The Touch Pad Screw; Figure; Disconnecting The Touch Pad Ffc Cable; Removing The Touch Pad - Toshiba Satellite X200; Satellite X205 Maintenance Manual

4 Replacement Procedures
4.16 Touch Pad

Removing the Touch Pad

To remove the Touch Pad, first remove the battery pack, keyboard, and top cover, and then
follow the steps below:
1. Remove five M2.5x3 screws securing the Touch Pad bracket to the rear side of the top
cover.
2. Disconnect the Touch Pad FFC cable from the Touch Pad.

Figure 4-47

4-42
Figure 4-46

Removing the touch pad screw

Disconnecting the touch pad FFC cable

[CONFIDENTIAL]
Satellite X200/ X205 Series Maintenance Manual
4.16 Touch Pad