Multifunction Meter - Yamaha XLT1200 WaveRunner 2005 Owner's/Operator's Manual

EJU01332

Multifunction meter

This meter contains following functions for
help and convenience in operating the
watercraft.
1 "MODE" button
2 "SET" button
3 "CODE" setting buttons
4 Tachometer
5 Speedometer
6 Fuel meter
7 Engine oil meter
8 Display for Clock, Hour meter, Trip meter and
Trip timer
9 Warning light
0 Display for PADLOC and direction of warning
indicator
A Battery warning indicator
B Exhaust temperature warning indicator
C Engine overheat warning indicator
D Fuel warning indicator
E Oil warning indicator
CAUTION:
@
G Do not run the engine over 4,000 r/min
to check the meter for operation on
land. The engine could overheat or the
catalytic converter could result in seri-
ous damage.
G Use the specified resistor-type spark
plugs and caps, otherwise the meter
may function erratically.
@
NOTE:
@
The demonstration mode display starts
showing after the engine starts. Then all dis-
plays light up and the buzzer sounds twice.
The meter will operate normally after a few
seconds. The current display will continue to
operate for 30 seconds after the engine
stops.
@
2-20
E