Table of Contents
Advertisement
EJU01221
Multifunction meter
This meter contains following functions for
help and convenience in operating the
watercraft.
1 "MODE" button
2 "SET" button
3 "CODE" setting buttons
4 Tachometer
5 Speedometer
6 Fuel meter
7 Engine oil meter
8 Display for Clock, Hour meter, Trip meter and
Trip timer
9 Warning light
0 Display for PADLOC and direction of warning
indicator
A Battery warning indicator
B Engine overheat warning indicator
C Fuel warning indicator
D Oil warning indicator
CAUTION:
@
G
Do not run the engine at full throttle or
more than 15 seconds to check the
meter for operation on land. The
engine could overheat.
G
Use the specified resistor-type spark
plugs and caps, otherwise the meter
may function erratically.
@
NOTE:
@
The demonstration mode display starts
showing after the engine starts. Then all dis-
plays light up and the buzzer sounds twice.
The meter will operate normally after a few
seconds. The current display will continue to
operate for 30 seconds after the engine
stops.
@
2-18
E
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
