Installation Of The Appliance In A Fitted Kitchen Unit - Zanussi ZR 304 CTF Instruction Booklet

Installation of the appliance in a fitted kitchen
unit
(Fig. 3)
Drill the unit using a Ø 2.5 mm drill (10 mm max.
penetration).
Fix the square fitting (1) to the appliance and
apply the rubber seal.
If the door is not already assembled fix the square
fitting (2) to the refrigerator and fitting (3) to the
unit column.
Fit the refrigerator into the space recessing it by
48 mm in relation to the unit base (Fig. 4).
Fix the refrigerator with the screws (5) to the
upper and lower part of the unit, after having
inserted the fittings (6) under the lower hinges.
Fix the square fitting (1) to the unit column and
the square fittings (2-3) to each other, after
inserting the clip (4).
Snap the ventilation grid.
Insert the hinge cover.
18mm
13mm
5
28mm
1
Ø 2,5
5
5
6
D612
D583
Fig. 3
4
3
2
Fig. 4
48mm
13