Adjusting The Engine Idling Speed - Yamaha FZ6-NA Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
WARNING
Be sure to place the hoses in their
original position as shown.
1. Original position (paint mark)
6
8. Install the seat.
EWA12471
Adjusting the engine idling
speed
The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
The engine should be warm before
making this adjustment.
NOTE:
The engine is warm when it quickly re-
sponds to the throttle.
Check the engine idling speed and, if
necessary, adjust it to specification by
turning the idle adjusting screw. To in-
crease the engine idling speed, turn the
screw in direction (a). To decrease the
engine idling speed, turn the screw in
direction (b).
EAU34300
1. Idle adjusting screw
NOTE:
If the specified idling speed cannot be
obtained as described above, have a
Yamaha dealer make the adjustment.
6-15
Engine idling speed:
1250–1350 r/min