Seat; Helmet Holder - Yamaha FZ6-NA Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Seat

To remove the seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
3
1. Seat lock
2. Unlock.
2. While holding the key in that posi-
tion, lift the rear of the seat up, and
then pull the seat off.
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
EAU32980
1. Projection
2. Seat holder
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
NOTE:
Make sure that the seat is properly se-
cured before riding.
3-16

Helmet holder

1. Helmet holder
2. Unlock.
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
EAU14281
EWA10160