Table of Contents
Advertisement
Matte color caution
CAUTION:
Some models are equipped with
matte colored finished parts. Be
sure to consult a Yamaha dealer for
advice on what products to use be-
fore cleaning the vehicle. Using a
brush, harsh chemical products or
cleaning compounds when cleaning
these parts will scratch or damage
their surface. Wax also should not
be applied to any matte colored fin-
ished parts.
MOTORCYCLE CARE AND STORAGE
EAU37833
Cleaning
ECA15192
Frequent, thorough cleaning of your
motorcycle not only enhances its ap-
pearance, but also improves its perfor-
mance and extends its life.
CAUTION:
G
Improper cleaning can damage
plastic parts such as cowlings,
panels, windshields, headlight
lenses, meter lenses, etc. Use
only a soft, clean cloth or
sponge with mild detergent and
water to clean plastic. If the
windshield is scratched, use a
quality plastic polishing com-
pound after washing.
G
Do not use any harsh chemical
products on plastic parts. Make
sure to avoid using cloths or
sponges which have been in
contact with strong or abrasive
cleaning products, solvent or
thinner, fuel (gasoline), rust re-
movers or inhibitors, brake flu-
id, antifreeze or electrolyte.
EAU38011
Before cleaning the motorcycle
1. Cover the muffler outlets, to pre-
2. Make sure that the spark plugs
ECA10731
3. Apply Yamaha Mud and Grease
Cleaning the motorcycle
1. Rinse any dirt and degreaser off
CAUTION:
G
7-1
vent water entry, with plastic bags
and strong rubber bands.
and all caps and covers are prop-
erly installed.
Release or another high-quality
degreaser to the crankcase, to re-
move any excessive grease, with a
paintbrush. Do not apply degreas-
er to the wheel axles.
with a garden hose, using only
enough pressure to do the job.
Do not use high-pressure wash-
ers, since excessive high pres-
sure may cause water seepage
and deterioration of wheel bear-
ings, the front fork, brakes,
transmission seals, sidecases,
and electrical parts.
7
ECA15250
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
