INSTRUMENT AND CONTROL FUNCTIONS
Passenger backrest
To remove the backrest
1. Push the lever on each side of the
backrest downward.
3
1. Backrest lever
2. Push the backrest forward until it
stops, then lift it upward and re-
move it by pulling it to the rear as
shown.
EAU35791
To install the backrest
Place the backrest in the original posi-
tion, then pull it backward until it stops
and the levers snap locking it into
place.
3-13
1. Locked position
WARNING
A loose backrest could cause an ac-
cident.
After installing the backrest, check
that both levers are fully locked into
place.
EWA12561