Brake Fluid Leakage; V-Belt; Drive Guard - Yamaha RX10GTL Owner's Manual

Hide thumbs Also See for RX10GTL:
Table of Contents

Advertisement

ESU00093

Brake fluid leakage

Apply the brake for a few minutes. Check to see if any
brake fluid leaks out from the brake hose joints or the
master cylinder.
WARNING
@
If brake fluid leakage is found, ask a Yamaha dealer
for immediate repairs.
@
CAUTION :
@
Brake fluid may deteriorate painted surfaces or plas-
tic parts. Never spill any brake fluid. If any is spilled,
clean it up immediately.
@
ESU04520

V-belt

Check the V-belt.
1. Remove the shroud and the left side cover, and then
remove the drive guard. (See pages 8-5–8-7 for
removal procedures.)
2. Check the V-belt for wear and damage. Replace if
necessary.
Wear limit a: 32.5 mm (1.28 in)
3. Install the left side cover and the shroud.
WARNING
@
G
Make sure that the drive guard is installed
securely before operating the snowmobile.
G
Never run the engine with the V-belt or drive
guard removed.
@
ESU00096

Drive guard

Check the drive guard mounts for damage. Make sure
that the drive guard is firmly in place.
6-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx10ml

Table of Contents