Coolant - Yamaha RS90NW Owner's Manual

E_8gg.book Page 4 Thursday, March 16, 2006 4:23 PM
6. Insert the oil level gauge/dipstick into the oil filler
hole, and then tighten it securely.
7. Connect the oil level gauge coupler.
ESU00086

Coolant

Check the coolant level in the coolant reservoir when the
engine is cold. If the coolant level is below the
"COLD LEVEL" mark, add soft water until it reaches the
"COLD LEVEL" mark. (See pages 8-12–8-13 for more
details.)
1 "COLD LEVEL" mark
WARNING
@
Do not remove the coolant reservoir cap when the
engine is hot.
@
CAUTION :
@
G Hard water or salt water is harmful to the engine
parts. You may use boiled or distilled water, if soft
water is not available.
G Tap water can be used temporarily in an emer-
gency.
@
6-4