Cleaning The Spark Arrester - Yamaha GRIZZLY 700 FI Owner's Manual

Atv
Hide thumbs Also See for GRIZZLY 700 FI:
Table of Contents

Advertisement

11. Install the panel.
NOTE:
The air filter element should be cleaned every 20–
40 hours. It should be cleaned and lubricated more
often if the ATV is operated in extremely dusty ar-
eas. Each time the air filter element maintenance
is performed, check the air inlet of the air filter case
for obstructions. Check the air filter case rubber
joint to the throttle body and the rubber joint mani-
fold fittings for an air-tight seal. Tighten all fittings
securely to avoid the possibility of unfiltered air en-
tering the engine.
ECB00760
CAUTION:
G
Make sure that the air filter element is prop-
erly seated in the air filter case.
G
Never operate the engine with the air filter el-
ement removed. This will allow unfiltered air
to enter the engine, causing rapid engine
wear and possible engine damage. Addition-
ally, operation without the air filter element
will affect the fuel injection system with sub-
sequent poor performance and possible en-
gine overheating.
EBU27420

Cleaning the spark arrester

Select a well-ventilated area free of combustible
materials and make sure the exhaust and muffler
are cool.
1. Remove the bolts.
8-40
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yfm7fgpw

Table of Contents