Yamaha GRIZZLY 700 FI Owner's Manual page 105

2. Install the front carrier stays by installing the
bolts and tightening them to the specified
torque.
Tightening torque:
Front carrier stay bolt:
26 Nm (2.6 m·kgf, 19 ft·lbf)
3. Install the front carrier by installing the bolts
and tightening them to the specified torques.
Tightening torques:
Carrier bolt (top):
26 Nm (2.6 m·kgf, 19 ft·lbf)
Carrier bolt (under the fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
4. Install panel A.
Panel C
To remove the panel
1. Remove the seat. (See page 4-19.)
2. Remove panel A.
3. Remove the quick fastener screws, and then
pull the panel upward as shown to remove it.
8-12
8