3. Remove the final gear oil filler bolt, final gear
oil level check bolt, and the final gear oil drain
bolt to drain the oil from the final gear case.
1. Final gear oil drain bolt
4. Install the drain bolt, and then tighten it to the
specified torque.
Tightening torque:
Final gear oil drain bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
5. Add the recommended final gear oil to the
brim of the check hole as shown.
1. Final gear oil
2. Final gear oil level check bolt
3. Correct oil level
Recommended final gear oil:
See page 10-1.
ECB00420
CAUTION:
Be sure no foreign material enters the final
gear case.
6. Install the oil level check bolt and oil filler bolt,
and then tighten them to the specified torques.
8-28
8