Rear Brake Pad Inspection; Inspecting The Brake Fluid Level - Yamaha Ultramatic GRIZZLY 660 Owner's Manual

EBU00878

Rear brake pad inspection

Inspect the brake pads for damage and wear.
If the thickness is less than the specified val-
ue, have a Yamaha dealer replace the pads.
1. Brake pad
a. Wear limit: 1 mm (0.04 in)
2. Brake pad plate
EBU00875

Inspecting the brake fluid level

Insufficient brake fluid may let air enter the
brake system, possibly causing the brakes to
become ineffective.
Before riding, check that the brake fluid is
above the lower level and replenish when
necessary. The rear brake fluid master cylin-
der reservoir is located behind panel B. (See
page 8-8 for panel removal and installation
procedures.)
8-37