3. Remove the defective bulb by pushing it
in and turning it counterclockwise.
WARNING
POTENTIAL HAZARD
A headlight bulb is hot when it is on and
immediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start
if the bulb touches something flamma-
ble.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching
or removing it.
4. Insert a new headlight bulb into the bulb
holder, push it in, and then turn it clock-
wise until it stops.
5. Install the bulb holder by turning it clock-
wise.
6. Install the bulb holder cover at the rear of
the headlight.
EBU01089
Headlight beam adjustment
CAUTION:
_
It is advisable to have a Yamaha dealer
make this adjustment.
_
To raise the beam, turn the adjusting screw in
direction a.
To lower the beam, turn the adjusting screw in
direction b.
1. Headlight beam adjusting screw
8-52