Yamaha Ultramatic GRIZZLY 660 Owner's Manual page 130

1. Torque wrench
7. Apply a light coat of engine oil to the O-
ring of the new oil filter cartridge.
NOTE:
_
Make sure the O-ring is seated properly.
_
8. Install the oil filter cartridge, and then
tighten it to the specified torque with a
torque wrench.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
9. Fill the engine with sufficient oil to reach
the specified level. Install the engine oil
filler cap and tighten it.
Recommended engine oil:
See page 10-2.
Oil quantity:
Total amount:
2.2 L (1.94 Imp qt, 2.33 US qt)
Periodic oil change:
1.9 L (1.67 Imp qt, 2.01 US qt)
With oil filter cartridge replacement:
2.0 L (1.76 Imp qt, 2.11 US qt)
8-15